Home
/
Solar Batten Light
/
Solar LED Batten Light Tri-proof Tube Light with Remote Control and Independent Advanced Security Sensor Module
Solar LED Batten Light Tri-proof Tube Light with Remote Control and Independent Advanced Security Sensor Module
Professional manufacturers, accept customization, quality assurance, price concessions!
Quantity
Detail
Customer Reviews
Basic Info.
Basic Info.
Model NO.
HL-BT30P-R24G
Lamp Body Material
Aluminum Alloy
Light Type
Solar
Color Temperature
6000K/4000K/3000K (Option)
Power
≥30W
Technics
Painted Matte
Illumination Time
8h
Cell Type
Lithium Battery
Charging Time (H)
6
Usage
Garden, Street, Indoor, Parking Lot, Bus Stop
IP Rating
IP65
Certification
CE, RoHS
Voltage
30V
With Light Source
With Light Source
Solar Panel Size
650X345X25mm
Solar Panel Chip
Mono Crystalline Silicon
Solar Panel Power
18V30W
Solar Panel Efficiency
22%
Light Tube Size
83X48X600mmmm
Light Power
30W
Light Luminous Efficiency
175lm/W
Work Mode
2.4G Remote Control and Sensor
Distance of Remote Control
Appr.100 Meters
Distance of Motion Sensor
8-10 Meters
Li-ion Battery
12.6V11ah
Battery Power
138.6wh
Beam Angle
120 Degree
Running Time
5-50 Hours
Rendering Index
85
Transport Package
Cartons and Pearl Cotton or Pallet
Specification
Package/Pcs 690x120x400mm
Trademark
Goginsor or OEM
Origin
China
HS Code
9405410000
Production Capacity
2000PCS/Month
Product Description
Charging Indicator Light
LED Indicator to show current battery level and charging status.
· Green LED – 70% - 100% Charged
· Yellow LED – 30% – 70% Charged
· Red LED – 30% Charge or Less
· Flashing LED of any color – Battery Charging
Please Note:
The indicator will flash when charging, and when fully charged, it will display green.
On/Off Switch - Will turn the Batten Light On and Off Manually. When using the remote control and the PIR Module, it must always be on.
Remote control instructions:
1. A remote control can divide the lights into 4 groups, each group can be individually turned on and off and dimmed.
2. The controllable range of the remote control and light can reach up to 100 meters.
3. All lights installed at 50-100 meters will form a local area network. Each light is equivalent to a signal repeater in the network,
so it can propagate the commands issued by the remote control one after another.
2. The controllable range of the remote control and light can reach up to 100 meters.
3. All lights installed at 50-100 meters will form a local area network. Each light is equivalent to a signal repeater in the network,
so it can propagate the commands issued by the remote control one after another.
As shown in the following figure:
2.4G Remote Sensor Module instructions:
1. One Remote Sensor Module can control all lights linked to the remote control.
2. The detection distance of this sensor is 8-10 meters.And it can be set a delay time(Time Knob) and adjusted ambient brightness
(LUX Knob). See the PIR PAD diagram.
3. When the Remote Sensor Module detects human signal, it will simultaneously emit a 2.4G remote control signal to turn on all lights linked to
the remote control. And when the preset time ends, it will simultaneously turn off all lights.
4.Even if the remote control turns off all lights, the Remote Sensor Module will still turn on all lights when someone enters the detection area.
5. The Remote Sensor Module has a manual switch that can be turned off when not needed.
It is charged by independent solar panels, so you can install it around 100 meters away from the light.
LUX Dial: Adjusts the level of darkness at Dusk that must be reached before the light turns on.
TIME Dial: Adjust delay time from 5 seconds to 5 minutes.
SENS Dial: Adjust the sensitivity from min. to max. (about 0-12 meters).
One Remote Sensor Module can control all lights linked to the remote control.
Product Details:
Product installation method:
1. Are you a factory or a trading company?
A: We are a manufacturer. Welcome OEM and ODM for you.
2. Can we have a sample order?
A: Of course! Any sample order is welcome for testing and checking.
3.What is the warranty for the products?
A: Battery:3 years. Controller/LED:5 years. solar panels:15-20 years
4. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 2-3weeks.
5.How to ship the goods?
A: By sea usually. If urgent requirement, air-shipping is available(except:Batteries)
6.How to deal with the faulty?
A: Firstly,Our products are produced in strict quality control system and the defective rate will be less than 0.2%.Secondly,
during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will
repair them and resend them to you or we can discuss the solution including re-call according to real situation.