10% Output at Dusk and Motion Detected 100% Output Automatic dimming 100W Solar LED Flood Light

1.  It will be turn on 10% output at dusk . Once the sensor is triggered by someone, it will output 100% and stand-by 10-15 seconts ,
   and then back to 10% output. It will be turn off at dawn automatically .
2.  On/Off Switch--Will turn the Flood Light On and Off Manually.  For your Lights to work it must always be turned on.

Getting Familiar with the Flood Light
    Charging Indicator Light
       1. Solid Green LED = Battery full Charged
        2. Flashing Green or Yellow or Red = Battery charging
        3. Battery Level Display:
            Green LED = High Volt ( >18.5V ),
            Yellow LED = Medium Volt (18.5-16.5V),
            Red    LED  = Low Volt  (<16.5V).
   Please Note:The indicator will flash when charging, and when fully charged, it will display green.
   

Adjust the PIR Sensor 

                          1. LUX Dial:  Adjusts the level of darkness at Dusk that must be reached before the light turns on.                                                                
                          2. TIME Dial: Adjust delay time from 5 seconds to 5 minutes.                
                          3. SENS Dial: Adjust the sensitivity from min. to max. (about 0-12 meters).