Home
/
8 Lighting Modes Solar LED Flood Light with Remote Control and motion sensor
8 Lighting Modes Solar LED Flood Light with Remote Control and motion sensor
Professional manufacturers, accept customization, quality assurance, price concessions!
Quantity
-
Detail
Basic Info.
Model NO.HL-FR100RF-8Lamp Body MaterialAluminum AlloyLight TypeSolarColor Temperature6000K/4000K/3000K (Option)Power100WTechnicsPainted MatteRunning Time6-60hoursCell TypeLithium BatteryCharging Time (H)6 hoursUsageGarden, Street, Indoor, Parking Lot, Bus StopIP RatingIP65CertificationCE, RoHSVoltage30VWith Light SourceWith Light SourceSolar Panel Power24V40WSolar Panel Size430X690X25mmSolar Panel ChipMono Crystalline SiliconSolar Panel Efficiency22%LED Light Power100WLED Chips90PCS 3030SMDLight Luminous Efficiency175lm/WLuminous Flux7996lmWork Mode2.4G Remote Control+8Lighting ModesDistance of Remote ControAppr.100mLi-ion Battery21V13ahBattery Power273whBeam Angle120 DegreeRunning Time5-50 HoursRendering Index>75Transport PackageCartons and Pearl Cotton or PalletSpecificationLight Size 335x235x160mmTrademarkGoginsor or OEMOriginChinaHS Code9405410000Production Capacity50000PCS/YearProduct Description
Charging Indicator LightLED Indicator to show current battery level and charging status.
· Green LED – 70% - 100% Charged
· Yellow LED – 30% – 70% Charged
· Red LED – 30% Charge or Less
· Flashing LED of any color – Battery Charging
Please Note:
The indicator will flash when charging, and when fully charged, it will display green.
On/Off Switch - Will turn the Batten Light On and Off Manually. When using the remote control and the PIR Module, it must always be on.Remote control instructions:
Syncing the Remote Control to the Solar Light
Syncing the Remote Control to the Solar Batten Light - Find one end of the batten light, which is a control panel with a switch, and the indicator light should not be visible.
- Keep holding the MASTER ON button ("I" is ON "O" is OFF),and push the power button on the light head, continue to hold the MASTER ON button.
- The solar light head will light and flash gently three times indicating the program has been accepted
- Release the MASTER ON button.
- The light is now is standard mode and can now be turned ON/OFF with the MASTER "I" and "O" at the top of the remote and dimmed using the dimmer buttons.
- Now select a work mode from the below
Work Modes
The Solar Batten Light has 8 pre-programed work modes.
Note:Mode Key Mode Name Running Mode 1 I Mode 1 Light on 30% from dark to dawn. 2 I Mode 2 Light on 50% for 8hrs, and then Light off. 3 I Mode 3 Light on 80% for 4hrs, and then Light off. 4 I Mode 4 Light on 100% for 2hrs, and then Light off. 1O Radar Sensor Mode1 Light on 100% for 3hrs, then to 0% until motion is detected, where the light will operate at 50%. 2O Radar Sensor Mode 2 Light on 100% for 3hrs, then to 5%, until motion is detected, where the light will operate at 50%. 3O Radar Sensor Mode 3 Light will not turn on unless motion is detected, where the light will operate at 100%. 4O Mode RF returns remote to normal mode (as per left image)
1. Once a program mode is selected the Batten light cannot be turned ON/OFF or dimmed with
the Master button. Choose button '4O' (RF Mode) to revert to standard mode to control these
functions.
2. In this version, the remote control cannot control groups separately, and even if the remote
control mode (4O)is selected, it can only control all lights together.
Establish a local area network
All lights installed at 50-100 meters will form a local area network. Each light is equivalent to a signal repeater in the network,
so it can propagate the commands issued by the remote control one after another.
When the 4O standard mode is selected, it will be able to control all lights synchronized with this remote control.
Programme Clear
If you want to clear the programming of the remote control and lights to restore the factory settings. Please do the following.
1. Turn on the light
2. Quickly press Master " I " key 5 times
3. LED lights will blink 5 times which means that the Programme is cleared successfully.Adjust the PIR Sensor Delay Timer
1. LUX Dial: Adjusts the level of darkness at Dusk that must be reached before the light turns on.
2. TIME Dial: Adjust delay time from 5 seconds to 5 minutes.
3. SENS Dial: Adjust the sensitivity from min. to max. (about 0-12 meters).
1. Are you a factory or a trading company?
A: We are a manufacturer. Welcome OEM and ODM for you.
2. Can we have a sample order?
A: Of course! Any sample order is welcome for testing and checking.
3.What is the warranty for the products?
A: Battery:3 years. Controller/LED:5 years. solar panels:15-20 years
4. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 2-3weeks.
5.How to ship the goods?
A: By sea usually. If urgent requirement, air-shipping is available(except:Batteries)
6.How to deal with the faulty?
A: Firstly,Our products are produced in strict quality control system and the defective rate will be less than 0.2%.Secondly,
during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will
repair them and resend them to you or we can discuss the solution including re-call according to real situation. -
Customer ReviewsNo comments